97玩棋牌斗地主

97玩棋牌斗地主_171棋牌手机版_梦幻棋牌游戏大厅

当前位置:返回首页 > 新闻资讯 > 公司动态 >
新闻中心
电话:13605413887(苏经理)
邮箱:1120779656@qq.com
联系人:苏经理
手机:13181713577(王经理)
网址:http://www.educneves.com
地址:济南市章丘区刁镇工业开发区

光氧催化废气处理设备的设计要注意什么?

来源:http://www.educneves.com/   发布时间:2019-04-04 14:42:03
工业废气处理设备在设计中,主要需要注意的风机的风量和风压,有机溶剂回收系统和填料,气注分离器这三个大的部分。如果我们在设计时不能注意这几点,那么在使用的时候,可能就不会起到相应的作用效果,那么接下来我们就来学习下它的设计需要注意什么?
  In the design of industrial waste gas treatment equipment, the wind volume and pressure of the fan, the organic solvent recovery system and the filler, and the gas injection separator are the three main parts that should be paid attention to. If we can't pay attention to these points in the design, then when we use it, it may not play a corresponding role. Then we will learn what we need to pay attention to in its design.
  1.风机风量和风压
  1. Air volume and pressure of fans
  大家都知道选择什么工业废气处理设备都是配置适当的风机才能有效收集气体,风量太小没有办法起到收集气体的作用,风量太大就产生的浪费,风压太高的话,会把吸收剂从出口带走,总之,适当的选择风机风量是很重要的,所以一般这个设计都是由技术人员来进行的。
  Everyone knows that the selection of industrial waste gas treatment equipment is equipped with appropriate fans to effectively collect gas, too small air volume can not play the role of collecting gas, too large air volume will produce waste, if the wind pressure is too high, the absorbent will be taken away from the outlet, in short, the appropriate selection of fan air volume is very important, so generally this design is by technicians. Carried out.
  2.有机溶剂回收系统和填料
  2. Organic solvent recovery systems and fillers
光氧催化设备
  工业废气处理设备中的有机溶剂回收系统是怎么保证吸收效率呢?那就是要均匀地分布吸收剂,所以有机溶剂回收系统必须能够保证液体的均匀分布。可以增加吸收剂和气体接触的面积,以利于气液充分接触,提高对三苯有机物的吸收效率,填料的主要作用是提高阻力,使气体的流速减缓。
  How to ensure the absorption efficiency of organic solvent recovery system in industrial waste gas treatment equipment? That is to distribute absorbents evenly, so the organic solvent recovery system must be able to ensure the uniform distribution of liquids. It can increase the contact area of absorbent and gas to facilitate full gas-liquid contact and improve the absorption efficiency of triphenyl organic compounds. The main function of filler is to increase resistance and slow down the flow rate of gas.
  3.气液分离器
  3. Gas-liquid separator
  在工业废气处理设备中要采用气液分离器,它能在末端将排放气体中夹 带的溶剂分离并回收系统内部,使得出口的气体中有机物含量不超过国家标准。
  Gas-liquid separator is used in industrial waste gas treatment equipment. It can separate the solvents entrained in the exhaust gas at the end and recover the solvents inside the system, so that the organic matter content in the outlet gas does not exceed the national standard.
  工业废气处理设备在进行设计的时候,一定要考虑它自身的使用原则,然后在进行使用的时候,设备才会发挥出良好的使用效果。
  In the design of industrial waste gas treatment equipment, we must consider its own principles of use, and then in use, the equipment will play a good role.
相关标签: 光氧催化设备、
  • 低温等离子体处理恶臭废气 介绍了低温等离子体对电子企业产生的恶臭气体的治理,该装置对恶臭浓...
  • UV光解除臭设备的原理 V光解除臭设备的原理是利用特制的高能高臭氧UV紫外线光束对废气进行...
  • UV光氧催化净化设备需要... 在国家政策面前所有的调整都是为了全民的利益能够得到好的保障而制...
  • 光氧催化设备的工作原理 光氧催化设备在光照下,如果光子的能量大于半导体禁带宽度,其价带...
  • 325棋牌游戏
    97玩棋牌斗地主_171棋牌手机版_梦幻棋牌游戏大厅光氧催化设备厂家-济南冠东环保设备97玩棋牌斗地主